For those wondering about Linux compatibility, I was able to install Ubuntu 9.04 easily enough, but none of the network interfaces worked. I then tried the “netbook remix” of Ubuntu, but this did not solve that problem.

(Note for those trying the netbook remix; it is about 950MB, and is an .IMG file, *not* an .ISO, so don’t try to use a CD. It is relatively easy to “dd” the file to an SD card, however, and the Eee will boot from the SD card. It’s also handy to know that you need to press F2 on boot to get to BIOS, then disable the “Boot Booster”, so that next time you boot you can press ESC to select the boot device.)

Once you install, you need to grab the AR813X-linux-v1.0.0.8.tar.gz package from http://partner.atheros.com/Drivers.aspx . Untar this (ignore the gzip errors), cd src, make, sudo make install, then insmod the resulting file. That should give you wired ethernet.

To get wifi, go to Administration > Software Sources > Updates and check off “Unsupported Updates (jaunty-backports)”, then do sudo apt-get install linux-backports-modules-jaunty . Once you reboot, you should have wireless.
Rating: 4 / 5

How to open the netbook:

In ordered to open the netbook for those who are experienced with working in desktops/laptops and want to upgrade their hdd to ssd or replace the ram, you must first take out the four screws at the bottom of the laptop. Next, on the top edge of the keyboard, you will see 4 pieces holding the keyboard into the laptop. Push down on each metal spring with a flat-tip screw driver, and pull the keyboard out from the top left corner, there are no screws attached to the keyboard. Lift the keyboard when you have the 4 top pins pushed in. The keyboard is glued to the laptop, so dont be afraid to pull hard in order to remove the keyboard when you are sure that the 4 metal pins at the top are not in the way (there is a sticker between the keyboard and the computer where the glue is, and it will most probably get ripped in some way, but its not important. You may have to use a little glue on the keyboard to put it back on when you put it back together, but I found it unecessary). Detach the keyboard from the computer by pushing the black clip on the port of the keyboard connection upwards, this will loosen the wire from the port and then you can pull the keyboard cable out of the port. You can start lifting the keyboard first and push down on each metal spring as you go from left to right as well. Next, you will see 6 black screws, two on the left, one in the middle, and three on the right, that attach the top surface metal frame to the plastic body inside. Remove these 6 screws. Now, underneath the yellow sticker that says “will void warranty if sticker is broken or removed” is another silver screw that must be removed. You must CAREFULLY remove the sticker from the laptop, I used a little rubbing alcohol to remove the sticker from one side of the screw, and reattached it later with some glue. THE STICKER IS EXTREMELY FRAGILE, BE CAREFUL (please see the link I posted *** at the bottom of this review). After you have the all 6 screws removed, remove the blue-tabbed ribbon cable on the left side by just pulling gently on it, and do the same thing with the black cable thats in between the two screws on the right side.

Now here is the tricky part, seperating the two plastic pieces of the laptop. START AT THE SD CARD SLOT: remove the plastic sd card and using a flat tip screwdriver, slowly and gently pry the two plastic panels apart, and make your way first toward the bottom of the laptop until you reach the opposite side of the sd card, then work your way up from the sd card. These tabs that hold the computer are extremely fragile, so be gently. The two panels should eventually snap off if you have worked your way around the laptop, prying it apart with a very finely tipped flat head screwdriver. When you got the two panels apart, most of the hard work is over!

THE DIMM SLOT IS LOCATED BENEATH THE HEATSINK ON THE TOP LEFT PCB. In order to remove this PCB (the heart of the PC, because it contains the ram, the atom chip, the graphics chip, the northbridge, etc) first remove the black cable thats connected to it on the bottom left. Next remove the orange ribbon cable thats attached to on the right side (just pull up on the cable, and push it back down to put it back in later) and lastly, disconnect the black cable thats on the left side of the fan. Now starting from the top left corner of the PCB (where the charge port is), just pull up. The plastic tab piece thats about 5mm to the right of the charge port is not really a tab or anything, it just pushes down on the PCB to hold it in place, so you do not have to touch this. Just pull up slowly on the board, and eventually, it should come off. NOW THERE IS STILL A BLACK CABLE TO THE LEFT OF THE USED-TO-BE ORANGE RIBBON CABLE, I would say to leave this connected because its a pain to reconnect (must be pushed in very hard). THERE IS ALSO STILL THE BATTERY CABLE THATS ATTACHED TO THE BOTTOM UNDERSIDE OF THE PCB. To disconnect, slowly lift the pcb, and disconnect the rainbow colored wire. Now just tilt the PCB vertically so that the black cable is still connected (there is also another, very thin black cable attached to the top of the PCB board, this is the antenna for the Wi-Fi, leave it attached). At this point, you can remove the hard drive that is to the right of this PCB board. Now underneath the black sticker on the bottom side of the PCB is the ram slot, lift up on the black sticker, loosen the metal clips on each side of the dimm, and the ram pops right up. put your new dimm in, push it down, and it snaps into place. NOW REASSEMBLE THE LAPTOP!

The performance on this laptop is much better than I thought it would be. I use the bluetooth in the netbook to connect to my Windows Mobile phone and I am able to connect to the internet through AT&T 3G. I get around 5.5 hrs of battery life, which is pretty good imo. The single silver plastic bar for the touchpad is a rocker, and its EXTREMELY STIFF. This is what I hated most of the laptop, but I’m assuming with time that it will get less stiff, we will have to see.

Overall, I commend Asus for making such a light and thin portable computer with this kind of speed and processing power. By using the method above, it is also possible to replace the battery with an aftermarket one, but I have no idea about those…

** If you have assembled a desktop in the past, I see no reason for you not being able to upgrade the RAM with the above help. Fiddling with the two shell pieces takes some effort if you’re interested in not breaking any of the tabs, but once the top shell is separated from the bottom it is much easier than the first part of the dissection. Overall, the process took me 1/2 an hour to take apart and put back together, but your mileage will obviously vary depending on your level of expertise. If you do manage to break a tab while removing the two shells, my friends have used EPOXY in between the two pieces to stick it back together, and you cant notice a difference. For those who venture into upgrading the RAM, good luck!

*** In regard to SPANKY who posted Comment #3 on this review (and to others who would like to know about the “void warranty” sticker): google “eee void sticker” and hit the first link.

Please do your homework before you go and criticize other people’s work and giving other’s wrong information. Thank you.

Rating: 5 / 5

Some may say that you’ll get used to it, but my response is, why should you have to? It’s not as if this machine has such overwhelming advantages, that the tradeoff is acceptable. Also, machines this portable are often intended for outdoor use; if you’re one of those people with that in mind, this display is completely unusable in that kind of lighting.

So yes, it’s small, light and stylish, but with a display that ranges from annoying to difficult to impossible to use, given the light conditions, I’d have a hard time recommending this to anyone.
Rating: 3 / 5

As with everything, the 1008HA comes with pluses and minuses.

The biggest plus is the weight: 2lbs 5 oz. compared to 2lbs 7.5 oz for the 900HA and 3lbs 4 oz for the 1000HA (and 3 lbs 5 oz for the latest 1000HA with chicklet keyboard).

Another plus is the Atom N280 processor which, while not a barn burner, is noticeably faster than the N270 in other models.

There is also Bluetooth and 820.11n wireless, but those are of no real interest to me since I don’t have an 802.11n router (but perhaps I should start thinking of one!).

The only clear minus for me is the port covers which make it inconvenient to connect things. They would be particularly inconvenient if I wanted to keep the teeny (1/4″ extension) USB receiver from a Logitech VX Nano Cordless Laser Mouse for Notebooks (Black) plugged in permanently. Unfortunately, Logitech does not make a Bluetooth version of the VX nano.

Then there are two things that are a positive or negative depending on your point of view.

The first is the nonremovable battery. If the battery were to die, it would have to be returned to Asus for service. I tell myself that by the time this happens I would probably be wanting to replace the machine. The reason I view it as a positive and not an outright negative is that the Li-polymer battery, which can be molded however the manufacturer wishes, helps give the 1008HA its reduced weight. Asus will shortly be introducing the 1005HA, which has a replaceable battery but is otherwise identical to the 1008HA. However, 1005HA’s weight will be back up in the 3 lb 2 oz range.

The second is the glare screen. It can take some getting used to. I don’t have any problems with my appearance, but if I wanted my face for wallpaper, I’d have taken my picture an uploaded it. However, so far I haven’t found the adjustment to be difficult. The biggest surprise was that outdoors the glare screen on the 1008HA turned out to be easier to read than the matte screen on my 900HA! The trick was to have the screen facing the sun, but at an angle so that the sun was not reflecting in my eyes. With the back of the screen toward the sun, the 1008HA’s screen is unreadable, but the 900HA’s screen was no great shakes either.

I won’t paint a pretty picture. I spent two days debating whether to keep the 1008HA or return it for what is now a considerably cheaper 1000HA, but I found myself getting used to the glare screen, felt I could easily live with the port covers, and decided to keep the 1008HA because of its reduced weight.

Rating: 5 / 5

This is my second Eee as I also own the Asus 1000HE. While I love the 1000HE, I was really looking forward to the 1008HA because of the slimmer design and full size right shift key. After a couple of days with the device, here are my thoughts:

Pros:

- It has a full size right shift key!!! Touch typist will appreciate this over the tiny, misplaced right shift key on the 1000HE.

- The 1008HA feels much lighter than the 1000HE. When people would pick up my 1000HE, they would be surprised by how heavy it is. The 1008HA feels great.

- Even in a slim package, the 1008HA still has all of the features you want in a Netbook: wireless N, Bluetooth, N280 processor, SDHC card slot, and decent battery life.

- I’m getting over 4 hours of battery life so far. Not bad for a 3 cell battery!!!

- It includes a slim VGA port but it includes a standard VGA adapter that is tucked away under the device.

- The 1008HA is a beautiful piece of equipment. I know this isn’t a technical benefit but it doesn’t hurt. The 1000HE is “husky” in comparison.

Cons:

- Having only 2 USB ports kinda sucks since I sometimes need to connect my phone, retractable mouse, and USB storage drive.

- As another reviewer mentioned, if you need to keep a wireless receiver plugged in for your non-bluetooh devices, the port covers will annoy you. Perhaps you can remove one of the covers?

- I prefer two separate mouse buttons instead of the rocker button. I don’t know why they switched to the rocker.

- The memory, hard drive, and battery are not user replaceable. I read that you can have these replaced at an Asus service center though. I find that 1GB of ram is fine for XP.

- Windows 7 doesn’t work yet because of video issues. I read on an Eee forum that there’s an auto login workaround if that interests you.

- It doesn’t have the legendary battery life of the 1000HE but 4 hours isn’t bad for a device this small.

Conclusion:

Whether you buy the 1008HA over the 1000HE, or the upcoming 1005HA (which is basically a 1000HE with more battery life and a full size right shift key), it comes down to this- are you willing to sacrifice battery life, a usb port, and additional cost to get a lighter, slimmer device. I like the 1008HA and highly recommend it to anyone that will appreciate this compromise. For those that prefer function over form, the 1000HE or the upcoming 1005HA should fit the bill. I don’t think you can go wrong with any of the Eee 100X series netbooks. They continue to offer all of the features at the best prices. Don’t get those cheaper, crippled netbooks. You’ll kick yourself.

UPDATE (6/30):

After using the 1008HA for a few weeks, I decided that battery life is more important than size and weight. With a fully charged 1000HE, you rarely have to look at the remaining power. You simply will not use it all before running out. While I like the 1008HA, I have the give the edge to the 1000HE. I plan to pick up the 1005HA when it ships. I suspect it will be the king of them all.
Rating: 5 / 5